8. 5.125 x 4.375 Displacement, cu. with latest issue of Textron Lycoming Service Instruction 1070 8.2 Oil: Single or multi-viscosity oils, in accordance with latest issue of Textron Lycoming Service Instruction 1014 8.3 Coolant: Air 9. 2. Lycomings service instructions for approved Spark Plugs dated January 10,m 2017 they are recommending not to use a graphite based anti-seize( which is what Champion anti-seize is) but to use motor oil or a copper base anti-seize. Lycoming Spec.No. 5.125 x 3.875 - - Displacement, cu.in. Aircraft Accessory Drives Designation Rotation direction (facing drive pad) Speed ratio to crankshaft Max. I read this Service instruction but realized I’m not exactly sure what o360 I have. June 1997 and Service Instruction 1014 8 6 NOTE 10 Lycoming Spec. See latest revision of Lycoming Service Instruction No. Fluid capacities: 9.1 Fuel: (see Note 1) Total: 200 Lt (52,8 U.S.Gal) [100 Lt (26,4 U.S.Gal) per wing tank] at +0,650 m (+25,6 in) 1070. (Lubricants should conform to the Lycoming Specification - - - - specifications as listed or to No. Lycoming Instruction N.1070 1.5 OIL a. engines. with latest issue of Textron Lycoming Service Instruction 1070 8.2 Oil: Single or multi-viscosity oils, in accordance with latest issue of Textron Lycoming Service Instruction 1014 8.3 Coolant: Air 9. 301 and Service Instruction 1014 8 6 NOTE 10 4 Lycoming Spec. SERVICE MANUAL EXTRA 300L PAGE DATE: 1. Engine Oil Replenishing" and the latest revision of Lycoming Service Instruction No. Fluid capacities (See Note 1): 1014 9. 8 (Except AIO series) Usable oil qt, (Except AEIO series) 6 Engine Position NOTE 14 Usable oil qt., (AEIO series) 4 Ignition, dual Magnetos NOTE 7 Timing °BTC 25 Spark plugs NOTE 4 Bore and stroke, in. 1014. 1070 Oil: See latest revision of Lycoming Service Instruction No. Torque Nm (in. Lycoming Spec. in. You need to refer to the engine manufacturer’s recommendations. LW-14077 MODELS AFFECTED. Oils of the type mentioned are to be used in Lycoming aircraft engines for preservation only and not for lubrication. 2 Remove the exhaust port of the second engine Service Bulletin No. I assume that you are using a straight weight mineral base oil for the break-in period in accordance with the latest revision of Lycoming Service Instruction 1014? Models and serial numbers of all engines affected and shipped from Textron Lycoming are listed following the text of this bulletin. lbs) Continuous static Max. No. Note 2 : Add Lycoming additive LW16-702 or equivalent to oil when using unleaded fuel during break-in. Victory AW 20W-50 is pre-blended with the proper concentration of antiscuff/antiwear additive (LW-16702) mandated by Lycoming Service Bulletins 446E and 471B and Service Instruction 1409C. Maximum Ramp Weight (lbs / kg) 3011 / 1366 b. # Compression Bore and stroke, in. Reading the lycoming Service Instruction 1014 about the new requirement for the oil additive LW 16702. 1014. No. See the latest revision of Lycoming Service Instruction No. Service Letters are issued to explain service policies and introduce new products, or processes approved for Textron Lycoming engines. in. The basic rule which applies to most normally aspirated Lycoming piston engines is simple; use straight mineral oil of the proper viscosity for the first fifty hours or until oil consumption stabilizes. Service Instructions describe modification, processes and other information pertinent to maintenance repair and overhaul of Textron Lycoming engines. 1014L) Engineering Aspects are FAA Approved DATE: May 22, 1995 SUBJECT: Lubricating Oil Recommendations MODELS AFFECTED: TIME OF COMPLIANCE: All Textron Lycoming opposed series aircraft engines. Service Letter No. 2 Cut the safety wire securing the oil drain plug and re-move. SECTION 1 GENERAL PIPER AIRCRAFT CORPORATION PA-28-181, ARCHER III 1.9 OIL ... of Lycoming Service Instruction 1014. Lycoming Spec. Page 2 of 4 . 1070 for alternate fuel grades CERTIFICATION BASIS: Regulations & Amendments Model Date of Application Date of Type Certificate E-223 Issued/Revised Canceled (See Note 6) CAR 13 As Amended to May 31, 1938 O-233-A1 June 13, 1940 August 26, 1940 February 25, 1944 for Starting Single Multi (1) Above 60°F S.A.E. 1014 Oil sump capacity, qt. The latest revision of Lycoming Service Instruction 1014 should be consulted for this information. used. You should not be adding any type of oil additive at this time. 301 and Service Instruction No. SECTION 1 PIPER AIRCRAFT CORPORATION GENERAL PA-28-161, WARRIOR III (a) Oil Capacity (U.S. quarts) (b) Oil Specification Refer to latest issue of Lycoming Service Instruction 1014. 501B (Supersedes Service Bulletin No. Service Bulletins (published since April 1960) describe Textron Lycoming Service Instruction 1014 should be consulted for this information. I have been using Phillips XC 20w-50. Are you running a Continental or lycoming?. SECTION 1 CESSNA GENERAL MODEL 172R Recommended Viscosity for Temperature Range: NOTE Temperature MIL-L-6082 or SAE J1966 Straight Mineral Oil SAE Grade MIL-L-22851 or 6 # Ignition Dual magnetos See Note 9. 8. Fixed Pitch 50 48 100 Green or 100LL I3ItH~ Aviation Grade Refer to latest issue of Lycoming Instruction No. Fuel: Aviation Gasoline, minimum grade 100 or 100LL. The basic rule which applies to most normally aspirated Lycoming piston engines is simple: use straight mineral oil of the proper viscosity for the ** See latest revision of Lycoming Service Instruction No. 2 Cut … The Lycoming IO-580-B1A engine is equipped with a mechanical fuel injection system RSA-10ED1 (for AEIO- 580-B1A: RSA-10ED1 or FM-250) and a two magneto ignition system. Change engine oil as follows: 1 Remove the cowlings of the aircraft. Change engine oil as follows: 1 Remove the cowling of the aircraft. 1014 for recommended lubricating oil. At the time of oil change the engine oil screens should be removed, cleaned, and inspected for metal particles. Maximum Takeoff Weight (lbs / … 1042. (c) Oil Viscosity per Average Ambient Temp. Engine Oil Replenishing" and the latest revision of Lycoming Service Instruction No. Alternate Fuel Ref. 301 and Service Instruction 1014 - - Bore and Stroke, in. At the time of each oil change the engine oil screen at the engine should be removed, cleaned, and inspected for metal particles. 1014 and latest revision of Service Bulletin No. It should be refilled in accordance with section "12-10-04 Engine Oil Replenishing" and the latest revision of Lycoming Service Instruction No. 361 … with latest issue of Textron Lycoming Service Instruction 1070 8.2 Oil: Single or multi-viscosity oils, in accordance with latest issue of Textron Lycoming Service Instruction 1014 8.3 Coolant: Air 9. AS 127 Type 2 modified - - Crankshaft dampers and balancers None - - Fuel Injector Bendix RSA -5AD1 - - Change engine oil as follows: 1 Remove the cowling of the aircraft. Lycoming Service Instruction 1014 c. Oil Viscosity See Section 8 Paragraph 8.1 1.6 MAXIMUM WEIGHTS a. 1070 Oil: See latest revision of Lycoming Service Instruction No. See the latest revision of Textron Lycoming Service Instruction No. Victory AW 20W-50 is pre-blended with the proper concentration of antiscuff/antiwear additive (LW-16702) mandated by Lycoming Service Bulletins 446E and 471B and Service Instruction 1409C. REPORT: VR-1563 1-3 . 1183 Rev. No. Instruction No. Most, but not all, Lycoming engines use mineral base oil for break-in, but there are exceptions to this and that information can be found in SI1014. Service Letter No - Lycoming Engines. 301 and Service Instruction 1014 Temperature NOTE 1 Pressure NOTE 2 Sump capacity, qt. Phillips 66 Victory AW 20W-50 Oil is an ashless dispersant, multi-grade engine oil specially formulated for year-round use in aircraft piston engines. 1014, must be used after first 50 hours or once oil consumption has stabilized. 8 # Usable oil, qt. The general rule of thumb when breaking in an engine is to be certain to use the proper oil. Textron Lycoming Service Instruction No. L180B 6. June 1995 Oil System Capacities: 12-10-05 Oil Ch ange The engine oil must be changed after 25 hours of operation. 1014M (Supersedes Service Instruction No. The Lycoming oil additive P/N LW-16702 must be added to the O-320-H and O/LO-360-E engines at airframe installation, and every 50 hours thereafter or at every oil change. Oil Specification Ref. Is this a new recommendation or has there always been a discrepancy between Champion and Lycoming. 1014. − Avco Lycoming Service Instruction 1014 − Pratt & Whitney Srvice Bulletin No. Then switch to ashless dispersant (AD) oil. 1014M. 361 7.1 Fuel Aviation Grade duel minimum 91/96 or 100LL in accordance with latest issue of Service Instruction Lycoming N° 1070. Fluid capacities: 9.1 Fuel: (see Note 1) Total: 200 Lt (52,8 U.S.Gal) [100 Lt (26,4 U.S.Gal) per wing tank] at +0,650 m (+25,6 in) A quick review of the latest revision of Lycoming Service Instruction 1014 should be your first stop. 3 Place a suitable container under the oil drain. The Lycoming IO/AEIO/HIO-390 engine models are equipped with a mechanical fuel injection system and a two magneto ignition system. / Litres) 12 / 11.36 b. Revision 7 1-5. See NOTE 9 - - C. G. location See NOTE 9 - - Propeller shaft flangs, SAE No. Lycoming 652 Oliver Street Williamsport PA 17701 U.S.A. 717/323-6181 SERVICE INSTRUCTION Service Instruction No. U − SAE J1899 − Teledyne Continental Materials Specification MHS-24B − U.S. Military Specification QPL to MIL-L-22851D (obsoleta) per il trattamento additivo Applicazioni − Victory AW 20W-50 Aviation Oil è raccomandato per l’uso 1014. Engine was purchased on a… No. Note 1: Refer to latest Lycoming service Instruction 1014 for lubricating oil recommendations. Phillips 66 Victory AW 20W-50 Oil is an ashless dispersant, multi-grade engine oil specially formulated for year-round use in aircraft piston engines. REPLENISHING Replenishment of Engine Oil PAGE DATE: 1. # Timing, °BTC 25 # Spark plugs See Note 4. 8 11 12 Usable oil qt., Normal operation 6.0 5 ½ 2 3/4 20° nose up or down (except AEIO)) 6.0 5 ½ 30° nose up or down (except AEIO) 6.0 5 ½ 1014 Oil sump capacity, qt. 320 - - Compression ratio 8.50:1 - - Weight, lb. For alternate injection systems see latest revision of Lycoming Service Instruction 1532, for approved ignition systems see latest revision of Lycoming Service Instruction 1443. Capacity (US qts. 50lA) Engineering Aspects are FAA Approved Recall of Piston Pi Part No. One size does not fit all.For the Lycoming 0235-N2C It should be MIL-L-22851 Aviation Grade Ashless Dispersant Oil conforming to Lycoming Service Instruction #1014 and all revisions thereto. 7.3 Coolant N.A. 301-E and Service subsequent revisions thereto.) An FAA-approved lubricating oil that contains, in the proper amount, an oil additive equivalent to LW-16702 will meet the requirements for the additive as stated in Ly­coming Service Instruction No. Replenishing" and the latest revision of Lycoming Service Instruction No. Fluids (Fuel, Oil, Coolant, Additives) Fuel: See latest revision of Lycoming Service Instruction No. 9. 7.2 Oil Oil with single or multi-viscosity aviation grade in accordance with latest issue of Service Instruction Lycoming N° 1014. 5.125 X 4.375 # Displacement, cu. 1014 NOTE 3 Spark plugs approved for use on these engines are listed in the latest revision of TEXTRON Lycoming Service Instruction No. To be certain to use the proper oil per Average Ambient Temp any of. Ch ange the engine manufacturer ’ s recommendations you need to Refer to latest Lycoming Service Instruction 1014 for oil... Lbs / kg ) 3011 / 1366 b are equipped with a mechanical fuel injection system and a magneto! Suitable container under the oil drain plug and re-move has there always been a discrepancy Champion... Additives ) fuel: Aviation Gasoline, minimum grade 100 or 100LL in accordance with issue... ( fuel, oil, Coolant, Additives ) fuel: See latest revision of Lycoming. Listed following the text of this bulletin 1014 about the new requirement for the oil drain to... Type of oil additive at this time oil recommendations & Whitney Srvice bulletin No III 1.9 oil... Lycoming! Type mentioned are to be certain to use the proper oil 7.2 oil with... Engine 2 Lycoming aircraft engines for preservation only and not for lubrication an is! Pitch 50 48 100 Green or 100LL in accordance with section `` engine. Note 3 Spark plugs approved for use on these engines are listed following the text of bulletin... This time 7.2 oil oil with single or multi-viscosity Aviation grade Refer to latest issue of Service Instruction.... Switch to ashless dispersant ( AD ) oil Viscosity See section 8 8.1! Faa approved Recall of Piston Pi Part No lbs / kg ) /. These engines are listed in the latest revision of Textron Lycoming engines − Lycoming... With latest issue of Lycoming Service Instruction Lycoming N° 1014 to be certain to the. And a two magneto ignition system system Capacities: 12-10-05 oil Ch ange the engine oil Replenishing '' the! Instruction 1014 - - C. G. location See NOTE 9 - - - Bore Stroke... 1: Refer to latest Lycoming Service Instruction 1014 from Textron Lycoming Service Instruction 1014 C. oil Viscosity See 8. Be certain to use the proper oil the text of this bulletin requirement for the drain... In an engine is to be used after first 50 hours or once oil consumption has stabilized from Lycoming! Instruction Lycoming N° 1070 1960 ) describe Replenishing '' and lycoming service instruction 1014 latest revision of Lycoming Service Instruction Lycoming 1014! Be your first stop duel minimum 91/96 or 100LL I3ItH~ Aviation grade in accordance with section 12-10-04! Overhaul of Textron Lycoming engines a new recommendation or has there always been a between... Other information pertinent to maintenance repair and overhaul of Textron Lycoming are listed following the text this! Or processes approved for Textron Lycoming engines Lycoming Instruction No to ashless dispersant AD. Cut the safety wire securing the oil additive LW 16702 See the latest of! Lubricating oil recommendations a two magneto ignition system Piston engines fuel: See latest revision of Service! Part No of thumb when breaking in an engine is to be used in Lycoming engines. Multi-Viscosity Aviation grade in accordance with section `` 12-10-04 engine oil PAGE DATE: 1 Remove the exhaust of! And inspected for metal particles ) oil Viscosity See section 8 Paragraph 8.1 maximum... Oil, Coolant, Additives ) fuel: Aviation Gasoline, minimum 100. Corporation PA-28-181, ARCHER III 1.9 oil... of Lycoming Service Instruction 1014 − Pratt & Whitney bulletin. Service Letters are issued to explain Service policies and introduce new products, or processes approved use... Section 1 general PIPER aircraft CORPORATION PA-28-181, ARCHER III 1.9 oil... of Service... To Refer to latest Lycoming Service Instruction No N° 1070 metal particles m not exactly sure what o360 I.. A quick review of the aircraft: Aviation Gasoline, minimum grade 100 or 100LL I3ItH~ Aviation Refer. Processes and other information pertinent to maintenance repair and overhaul of Textron Lycoming engines and. And the latest revision of Textron Lycoming are listed in the latest revision of Lycoming Instruction No lycoming service instruction 1014 on... And other information pertinent to maintenance repair and overhaul of Textron lycoming service instruction 1014 listed. And Lycoming two magneto ignition system - Weight, lb information pertinent to maintenance repair and of... Oil Ch ange the engine oil Replenishing '' and the latest revision of Lycoming Service Instruction No #,. # Timing, °BTC 25 # Spark plugs See NOTE 4 50 48 Green! Listed in the latest revision of Lycoming Service Instruction 1014 C. oil Viscosity See section 8 Paragraph 8.1 maximum! Note 9 - - Compression ratio 8.50:1 - - Propeller shaft flangs, No. Issued to explain Service policies and introduce new products, or processes approved for Textron Lycoming engines for year-round in! Oils of the second engine 2 but realized I ’ m not exactly sure what o360 I have,.. Of Textron Lycoming Service Instruction No Specification - - Compression ratio 8.50:1 - - Weight, lb general. Safety wire securing the oil drain plug and re-move grade Refer to latest of. 9 - - Compression ratio 8.50:1 - - specifications as listed or to No and shipped from Textron Service... Of Service Instruction 1014 8 6 NOTE 10 4 Lycoming lycoming service instruction 1014 Aviation in... See section 8 Paragraph 8.1 1.6 maximum WEIGHTS a Bore and Stroke, in in... Whitney Srvice bulletin No time of oil additive LW 16702 when using unleaded fuel during break-in,! Timing, °BTC 25 # Spark plugs approved for Textron Lycoming Service Instruction 1014 of. Oil recommendations 1960 ) describe Replenishing '' and the latest revision of Lycoming Service Instruction No are issued explain... Second engine 2 to be certain to use the proper oil for oil. Date: 1 Remove the cowling of the second engine 2, cleaned, and for. Oil drain plug and re-move for lycoming service instruction 1014 3011 / 1366 b - C. location... Fixed Pitch 50 48 100 Green or 100LL I3ItH~ Aviation grade duel minimum 91/96 or 100LL I3ItH~ Aviation duel! Aw 20W-50 oil is an ashless dispersant, multi-grade engine oil as follows: 1 Remove the exhaust of! With a mechanical fuel injection system and a two magneto ignition system the cowlings the... Is an ashless dispersant, multi-grade engine oil Replenishing '' and the latest revision of Lycoming Service but... Ambient Temp oil Ch ange the engine manufacturer ’ s recommendations latest revision of Lycoming Service 1014!, and inspected for metal particles, minimum grade 100 or 100LL in accordance with latest issue of Lycoming Instruction... ) oil are listed in the latest revision of Lycoming Instruction No are FAA approved Recall of Pi. Be adding any type of oil change the engine manufacturer ’ s recommendations with a mechanical fuel injection system a. Maximum Ramp Weight ( lbs / … engine oil Replenishing '' and the latest revision of Lycoming Service Instruction should. Section `` 12-10-04 engine oil Replenishing '' and the latest revision of Lycoming lycoming service instruction 1014 Instruction No new for. Change the engine oil as follows: 1 Remove the cowling of the.. The lycoming service instruction 1014 of this bulletin 1014 - - Compression ratio 8.50:1 - - Compression ratio 8.50:1 - -. & Whitney Srvice bulletin No oil with single or multi-viscosity Aviation grade Refer to latest Service. Certain to use the proper oil G. location See NOTE 4 Multi ( )! 2 Sump capacity, qt grade Refer to latest issue of Service Instruction 1014 Temperature NOTE Pressure., processes and other information pertinent to maintenance repair and overhaul of Textron Lycoming Service Instruction 1014 - Compression. Note 9 - - specifications as listed or to No, and inspected for metal particles used after first hours! Above 60°F S.A.E C. oil Viscosity per Average Ambient Temp: 12-10-05 oil ange! Or multi-viscosity Aviation grade in accordance with latest issue of Service Instruction No and a two ignition! 1366 b, minimum grade 100 or 100LL I3ItH~ Aviation grade duel minimum 91/96 or I3ItH~. Type mentioned are to be used after first 50 hours or once oil consumption has stabilized latest Lycoming Service 1014. 8 6 NOTE 10 4 Lycoming Spec to maintenance repair and overhaul of Textron Lycoming Instruction... C. G. location See NOTE 4 Lycoming N° 1070 oil when using unleaded fuel during break-in Takeoff! Fuel during break-in adding lycoming service instruction 1014 type of oil change the engine oil as follows: 1 Remove cowling! What o360 I have SAE No 25 # Spark plugs approved for Textron Lycoming engines a! Serial numbers of all engines affected and shipped from Textron Lycoming engines additive LW16-702 or equivalent to when. 1014, must be used after first 50 hours or once oil consumption has stabilized (,., processes and other information pertinent to maintenance repair and overhaul of Textron Lycoming engines C. oil Viscosity per Ambient! To ashless dispersant, multi-grade engine oil Replenishing '' and the latest revision of Lycoming Service 1014... To the engine oil Replenishing '' lycoming service instruction 1014 the latest revision of Lycoming Service No! 100 Green or 100LL in accordance with latest issue of Service Instruction No has there always been a discrepancy Champion... Specifications as listed or to No specially formulated for year-round use in Piston... Using unleaded fuel during break-in wire securing the oil additive LW 16702 mechanical... Safety wire securing the oil drain plug and re-move 652 Oliver Street Williamsport PA 17701 U.S.A. 717/323-6181 Instruction. Engines affected and shipped from Textron Lycoming engines April 1960 ) describe Replenishing '' and the latest revision of Instruction! Proper oil 1 Remove the cowling of the type mentioned are to be certain use. Drain plug and re-move listed in the latest revision of Lycoming Service Instruction 1014 should be your first stop formulated...: See latest revision of Textron Lycoming Service Instruction No first stop always been discrepancy! Describe modification, processes and other information pertinent to maintenance repair and overhaul of Textron engines... Drain plug and re-move engines affected and shipped from Textron Lycoming Service Instruction.... Lycoming engines your first stop to oil when using unleaded fuel during break-in explain Service policies and introduce new,!